Engineering, 18.03.2020 21:36 PollyB2759
Points A [at (3, 6) m] and B [at (8, –3) m] are in a region where the electric field is uniform and given by E = 12 N/C, in the positive x-direction. What is the electric potential difference VA – VB?
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
Points A [at (3, 6) m] and B [at (8, –3) m] are in a region where the electric field is uniform and...
Mathematics, 28.01.2021 05:20
Mathematics, 28.01.2021 05:20
Mathematics, 28.01.2021 05:20
English, 28.01.2021 05:20
Mathematics, 28.01.2021 05:20
Mathematics, 28.01.2021 05:20
Chemistry, 28.01.2021 05:20
Mathematics, 28.01.2021 05:20
Mathematics, 28.01.2021 05:20
Social Studies, 28.01.2021 05:20