A cylindrical metal specimen having an original diameter of 10.55 mm and gauge length of 54.5 mm is pulled in tension until fracture occurs. The diameter at the point of fracture is 7.16 mm, and the fractured gauge length is 69.0 mm. Calculate the ductility in terms of (a) percent reduction in area (percent RA), and (b) percent elongation (percent EL).

(a) 53.94%

(b) 26.61%

Explanation:

Change in area will be given by

where represent change in area R is radius and subscripts O and n represent original and new respectively.

Substituting 10.55/2 for original radius and 7.16/2 for new radius then

(b)

Similarly, percentage elongation will be found by dividing the change in length by the the original length. In this case, rhe original length was 54.5mm and goes to 69 mm so the change in length is given by subtracting the final length from the original length

Percentage elongation is

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answer: i loved cheese burgers

explanation: