Engineering, 13.03.2020 04:59 portedon8644

A cylindrical bar of metal having a diameter of 18.4 mm and a length of 192 mm is deformed elastically in tension with a force of 52400 N. Given that the elastic modulus and Poisson's ratio of the metal are 64.0 GPa and 0.32, respectively, determine the following: (a) The amount by which this specimen will elongate in the direction of the applied stress. (b) The change in diameter of the specimen. Indicate an increase in diameter with a positive number and a decrease with a negative number.

Answers: 3

Show answers

Answers

Answer from: tanya44737

Part a

The amount by which the specimen will elongate $(\bigtriangleup L)$ in the direction of the applied stress is 0.5912 mm

Part b

The change in diameter $(\bigtriangleup d)$ of the specimen is -0.0184 mm

. Explanation:

When a material is loaded with a force, internal stress is created inside the material and material gets deformed due to the applied load. The deformation occurs in both lateral and longitudinal.

Force:

Force is a push or pull applied on an object, which can resultant changes in the physical properties of the object or causes a certain amount of work done.

Tensile force:

It is the force that acts along the length of the material in the opposite direction that pulls the material apart. The tensile force is positive in magnitude.

Compressive force:

It is the force that acts along the length of the material in the opposite direction that squeezes the material together. The compressive force is negative in magnitude.

Stress:

The internal resistance force acting on the surface of the material per unit area is known as stress.

Longitudinal Strain:

The ratio of change in length to the original length of the specimen is known as strain.

Young’s modulus:

The ratio of true stress to the true strain of the given specimen is known as Young’s modulus.

Poisson ratio:

The ratio of lateral strain to the longitudinal strain is known as Poisson ratio.

Fundamentals

The relation for area (A) of the circular section is given as follows:

$A=\frac{\pi}{4}d^2$

Here, the diameter of the rod is d.

The relation for stress is given as follows:

$\sigma=\frac{P}{A}$

Here, stress is $\sigma$ , load applied is Р , and cross sectional area is A

. The relation for longitudinal strain is given as follows:

$\epsilon=\frac{\bigtriangleup L}{L}$

Here, longitudinal strain is , change in length is $\bigtriangleup L$ , and original length is L.

The relation for Young’s modulus is given as follows:

$E=\frac{\sigma}{\epsilon}$

Here, young’s modulus is E

. The relation for Poisson ratio is given as follows:

$\mu=\frac{lateral\, strain}{longitudinal\, strain}\\\\=-\frac{\bigtriangleup d/d}{\bigtriableup l/l}$

Here, Poisson ratio is $\mu$ , change in dimension is $\bigtriangleup d$ , and original diameter is d.

The negative sign is due the decrease in the diameter of the specimen due to the tensile force.

(a)

Find the area of cross section of the specimen.

$A=\frac{\pi}{4}d^2\\\\=\frac{\pi}{4}(18.4mm)^2\\\\A=265.9mm^2$

Find the change in length of the specimen using young’s modulus formula.

$E=\frac{\sigma}{\epsilon}\\\\=\frac{P}{A}\times \frac{L}{\bigtriangleup L}\\\\\bigtriangleup L=\frac{PL}{AE}=\frac{52400N\times 192mm}{265.9mm^2\times 64\times 10^9\frac{N}{m^2}\times(\frac{1m}{10^3mm})^2}\\\\\bigtriangleup L=0.5912mm$

(b)

Write the relation for Poisson ratio.

$\mu=\frac{lateral\, strain}{longitudinal\, strain}\\\\=-\frac{\bigtriangleup d/d}{\bigtriableup l/l}\\\\0.32=-\frac{\bigtriangleup d/18.4}{0.591/192}\\\\=-0.0184mm$

Answer from: Quest

Iactually don’t know but i know someone you can ask

Answer from: Quest

answer:

jiggy jiggy jab my titty

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

You know the right answer?

A cylindrical bar of metal having a diameter of 18.4 mm and a length of 192 mm is deformed elastical...

Questions