Engineering, 13.03.2020 03:05 P4thing

A temperature transducer is used to measure the temperature of steam coming out of a steam generator. The following data are available from the manufacturer of the temperature transducer: Range: 0 − 1000 K Sensitivity: ±0.5% of full scale Linearity: ±1.5% of full scale Accuracy: ±1.0% of full scale To determine the repeatability of the transducer, 10 auxiliary tests at the desired average temperature of 800 K were run. The standard deviation of these measurements is 25 K. In a separate test of the data transmission system, 10 tests of the same temperature input resulted in a standard deviation of 20 K. The A/D converter is tested 10 times resulting a standard deviation of 15 K. (a) (10) Calculate the random uncertainty of the temperature measurement at 95% confidence level. (b) (8) Calculate the systematic uncertainty of the temperature measurement. (c) (7) Calculate the total uncertainty of the temperature measurement. If the steam temperature needs to controlled within ±10% from the desired 800 K. Please comment on the adequacy of this device.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

A temperature transducer is used to measure the temperature of steam coming out of a steam generator...

Questions