subject
Engineering, 12.03.2020 22:28 isabel81ie

A concrete dam 100 ft long is constructed on a stratum of sand-silt soil 10 ft thick and it is 6 ft below the soil surface. The hydraulic conductivity of the soil is 0.1 ft per day. Underlying the sand-silt soil an impermeable rock formation is present.
Considering the level of water in the upstream part of the dam is 45 ft above ground and downstream is at the same level of the ground, draw the flow net below the dam with three flow channels and 12 head drops and the flow rate in gal/day per unit foot of dam width (gal/day/ft).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
You know the right answer?
A concrete dam 100 ft long is constructed on a stratum of sand-silt soil 10 ft thick and it is 6 ft...
Questions
question
Biology, 23.01.2022 21:30
question
English, 23.01.2022 21:30
question
English, 23.01.2022 21:30
Questions on the website: 13722367