Engineering, 12.03.2020 05:22 MorrisAshley
A non rotating aluminum rod has diameter of 1.5 inches. It is loaded in fully reversed torsion at a temperature that can go as high as 300 F. The steel has ultimate tensile strength of 45 kpsi. You may use 99% reliability. a) Determine the uncorrected fatigue strength Sf’b) Determine the corrected fatigue strength Sfc) Develop an equation for the corrected S-N diagram and plot it (logarithmic axes would make it look like the ones in the book) for up to 108 cycles. d) If a certain application of this rod induces fully reversed bending stress of 25 kpsi, what would be the life of the rod (in cycles)?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A non rotating aluminum rod has diameter of 1.5 inches. It is loaded in fully reversed torsion at a...
Questions
Computers and Technology, 02.12.2019 23:31
Computers and Technology, 02.12.2019 23:31
History, 02.12.2019 23:31
