Engineering, 12.03.2020 05:39 emthebest123
A thermocouple is made by welding two dissimilar metals into a small spherical bead. The potential difference between the two legs of the termocouple is a measure of the average temperature in the bead. Suppose that you have a chromel-alumel thermocouple bead, with the following material properties: \[Rho]=2700 kg m^-3, k=100 W/(m K), Subscript[C, p]=400 J/(kg K). The thermocouple bead has a radius of 1 mm. It is to be plunged suddenly from room temperature into boiling water (100 \[Degree]C), and the heat transfer coefficient is 10^4 W/(m^2 K). Determine the response time of the thermocouple, by calculating how long it takes for the thermocouple bead temperature to be within 0.1% of 100 \[Degree]C, i. e. how long does it take for the thermocouple temperature to rise to a temperature of 99.9 \[Degree]C? Hint: This is a small bead so we might want to test to see if we can simplify the handling of this problem as we could do for a thin sheet of Aluminum, i. e. check to see if Newtonian cooling applies.
Answers: 2
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
A thermocouple is made by welding two dissimilar metals into a small spherical bead. The potential d...
History, 25.10.2019 14:43
Mathematics, 25.10.2019 14:43
History, 25.10.2019 14:43
English, 25.10.2019 14:43
Geography, 25.10.2019 14:43
Biology, 25.10.2019 14:43
Mathematics, 25.10.2019 14:43
History, 25.10.2019 14:43
Mathematics, 25.10.2019 14:43
Mathematics, 25.10.2019 14:43
Mathematics, 25.10.2019 14:43