Engineering, 12.03.2020 03:32 coollid876
A three-phase 12 HP motor is 90% efficient with a .89 lagging power factor. What is the required rated input apparent power for this motor running under full load?
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
A three-phase 12 HP motor is 90% efficient with a .89 lagging power factor. What is the required rat...
Mathematics, 22.04.2020 01:39
Mathematics, 22.04.2020 01:39
Advanced Placement (AP), 22.04.2020 01:39
History, 22.04.2020 01:40
Mathematics, 22.04.2020 01:40