Engineering, 10.03.2020 08:22 QuestionsAnsweredNow

Kirchoff's Law states that, by the time current has returned to its source, all
must be used
Resistance
Electron flow
Voltage
Wattage

Answers: 3

Show answers

Answers

Answer from: Kassi07

Kirchoff's Law Kirchoff's Law states that, by the time current has returned to its source is explained in the following.

Explanation:

Kirchhoff's Current Law (KCL) is Kirchhoff's first law that deals with the conservation of charge entering and leaving a junction. ... In other words the algebraic sum of ALL the currents entering and leaving a junction must be equal to zero.Kirchoff's laws apply for a given instant in time. So the voltages at a given moment around a loop will all sum to zero, or currents in a node sum to zero if you look at the instantaneous voltage and current. But they will be out of phase.Kirchhoff Voltage Law states that ''The algebraic sum of all voltages (source voltage and voltage drops) is equal to zero around a close path''. This is called KVL ( Kirchhoff Voltage Law) equation. The source voltage is equal to the sum of all voltage drops. Kirchhoff's Voltage Law (KVL) is Kirchhoff's second law that deals with the conservation of energy around a closed circuit path. Kirchhoff's laws can be used to determine the values of unknown values like current, Voltage in the circuit. These laws can be applied on any circuit (with some limitation), and useful to find the unknown values in complex circuits and networks.

Answer from: lizredrose5

Kirchoff's law states that by the time current has reached to its source all voltage must be used.

Explanation:

Kirchoff's voltage law states that the algebraic sum of all the voltages across a closed loop is zero. As the circuit is a closed conducting path, no energy is lost. ices All the voltage that is supplied from the voltage source is dropped at the devices in the circuit.

The potential difference maintained by the voltage source enables the flow of current across the circuit. As the supplied voltage drops at each elements of the circuit, all voltage is used by the time current has returned to the surface.

Answer from: Quest

jesus loves you

explanation:

Answer from: Quest

Ithink i did this class in 7th grade doe i don’t remember

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Kirchoff's Law states that, by the time current has returned to its source, all
must be used

Questions