Engineering, 10.03.2020 00:17 svlext

The electricity generated by wind turbines annually in kilowatt-hours per year is given in a file. The amount of electricity is determined by, among other factors, the diameter of the turbine blade (in feet) and the wind velocity in mph. The file stores on each line the blade diameter, wind velocity, and the approximate electricity generated for the year. For example,

5 5 406
5 10 3250
5 15 10970
5 20 26000
10 5 1625
10 10 13000
10 15 43875
10 20 104005

Required:
Determine how to graphically display this data.

Answers: 1

Show answers

Answers

Answer from: saintsfan2004

This problem is solved using Matlab, code along with step-by-step explanation and output results are provided below.

Matlab Code with Explanation:

% load the .txt file named data in which data is stored and store the data in a variable D

D=load('data.txt')

% the 2nd column of data contains speed of the wind turbine so store it in a variable named speed

speed=D(:,2);

% the first 4 data points are for 5 feet blade diameter so extract and store them in variable speed_5

speed_5=speed(1:4);

% from the 5th data point to the end of vector contains data for 10 feet blade diameter so extract and store them in variable speed_10.

speed_10=speed(5:end);

% the 3rd column of data contains generated electricity of the wind turbine so store it in a variable named kwh

kwh=D(:,3);

% the first 4 data points are for 5 feet blade diameter so extract and store them in variable kwh_5

kwh_5=kwh(1:4);

% from the 5th data point to the end of vector contains data for 10 feet blade diameter so extract and store them in variable kwh_10.

kwh_10=kwh(5:end);

% Plot the speed _5 on x-axis and corresponding kwh_5 on y-axis

plot(speed_5,kwh_5,'LineWidth',2)

% hold on means we want to plot another curve in the same graph so wait

hold on

% Plot the speed _10 on x-axis and corresponding kwh_10 on y-axis

plot(speed_10,kwh_10,'LineWidth',2)

% legend command provides visual aid to distinguish between the two curves

legend('5 feet blade','10 feet blade')

% set the title of the graph, x-axis and y-axis labels

title('Generated Electricty Vs Wind speed')

xlabel('Wind speed (mph)')

ylabel('Generated Electricity (kWh)')

Output:

As you can see in the attached graph, 2 curves are being plotted one for 5 feet blade diameter and 2nd for 10 feet blade diameter of the wind turbine.

The generated electricity corresponding to 10 feet blade diameter is way more than the 5 feet blade diameter.

The electricity generated by wind turbines annually in kilowatt-hours per year is given in a file. T

Answer from: Quest

Wlficbs dkv she can ekeceiwnenfkvfeb

Answer from: Quest

answer:

try looking it up that is always

explanation:

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

Answer

You know the right answer?

The electricity generated by wind turbines annually in kilowatt-hours per year is given in a file. T...

Questions