A long bone is subjected to a torsion test. Assume that the inner diameter is 0.375 in. and the outer diameter is 1.25 in., both for a circular cross section. If E = 16 GPa and v = 0.325, find the largest torque that can be applied prior to yield, where σ yield = 1.25 ksi (i. e., a maximum normal stress). Humphrey, Jay D.; O’Rourke, Sherry L.. An Introduction to Biomechanics (Kindle Locations 5346-5349). Springer New York. Kindle Edition.

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

What precautions should you take to prevent injuries when dealing with heavy loads?

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k