Engineering, 07.03.2020 03:32 cityglamevents

What is the value of the magicPowers variable after executing the following code snippet? String magicPowers = ""; int experienceLevel = 9; if (experienceLevel > 10) { magicPowers = magicPowers + "Golden sword "; } if (experienceLevel > 8) { magicPowers = magicPowers + "Shining lantern "; } if (experienceLevel > 2) { magicPowers = magicPowers + "Magic beans "; }

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers

Answers: 3

Answer

Engineering, 06.07.2019 02:30

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

Answer

Engineering, 06.07.2019 02:30

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

Answer

You know the right answer?

What is the value of the magicPowers variable after executing the following code snippet? String mag...

Questions