Engineering, 07.03.2020 00:36 jilliandantuma84
A 0.5 in diameter rubber plug is placed inside a tube whose inside diameter is 0.57 in. The Modulus of Elasticity of the rubber plug is E = 730 psi and Poisson's ratio is ν = 0.45. If the tube and the plug are the same length, what pressure, p, must be applied to the rubber plug to cause it to contact the sides of the tube? Express your answer in psi, to the nearest psi.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
A 0.5 in diameter rubber plug is placed inside a tube whose inside diameter is 0.57 in. The Modulus...
Questions
Computers and Technology, 13.11.2019 18:31
Biology, 13.11.2019 18:31
Biology, 13.11.2019 18:31
Computers and Technology, 13.11.2019 18:31
English, 13.11.2019 18:31
