Engineering, 07.03.2020 00:18 shan8747

Assuming D=0.6, determine the ratio Vo/Vin QUESTION 7 In the previous question, determine IL/Io. QUESTION 8 Determine the RMS value of the following waveform (first do something about the second and 3rd terms). v(t) = 3 + 10cos(wt) + 5 sin(wt) + 4 cos(3wt) + 2sin(7wt-30) QUESTION 9 Consider the following signal: Starts at the origin. Linearly decreases to -1 by T/6. Remains at -1 until T/3. Then linearly increases to 1 by 2T/3. Remains at 1 for another T/6, and then decreases linearly to 0 at T. T is the period. Solve for a0 QUESTION 10 For the previous question, solve for a5 QUESTION 11 From Question 9, solve for b5. QUESTION 12 From Question 9, solve the RMS value of the fundamental component.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

Engineering, 06.07.2019 03:30

The load on a bolt consists of an axial pull of 10 kn together with a transverse shear force of 5 kn. the bolt material has a yield strength of syt syc 100 mpa. find the diameter of the bolt at factor of safety n-0.5, n 1 and n-2 using maximum shear stress theory

Answers: 3

Answer

You know the right answer?

Assuming D=0.6, determine the ratio Vo/Vin QUESTION 7 In the previous question, determine IL/Io. QUE...

Questions