Engineering, 05.03.2020 18:39 EstherAbuwaah

Two bodies have heat capacities (at constant volume) c, = a and c2 = bT and are thermally isolated from the rest of the universe. Initial temperatures of the bodies are T_10 and T_20, with T_20, > T_10. The two bodies are brought into thermal equilibrium (keeping the volume constant) while delivering as much work as possible to a reversible work source.
(a) What is the final temperature T_f of the two bodies? (In case you are unable to solve for an explicit value of T_i, you will still get full credit if you explain in detail how to obtain the value).
(b) What is the maximum work delivered to the reversible work source? (You may express the answer in terms of T_e without having to explicitly solve for it).

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

Two bodies have heat capacities (at constant volume) c, = a and c2 = bT and are thermally isolated f...

Questions