Engineering, 05.03.2020 09:13 mustafaserang582
We have two noise sources and an RMS voltmeter. We measure the RMS values and they are 3V and 5V. We would like to determine the correlation coefficient but we have an adder only. Putting the two noise sources in series produces a noise with 4V effective value.
a. Calculate the crosscorrelation coefficient at this arrangement.
b. Both uncorrelated noises must have 1 V rms amplitude.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
You know the right answer?
We have two noise sources and an RMS voltmeter. We measure the RMS values and they are 3V and 5V. We...
Questions
Mathematics, 14.12.2019 22:31
Mathematics, 14.12.2019 22:31
Social Studies, 14.12.2019 22:31
Advanced Placement (AP), 14.12.2019 22:31
World Languages, 14.12.2019 22:31
English, 14.12.2019 22:31
