Engineering, 04.03.2020 19:50 jyworthy
An airplane is moving at a constant speed of 600 miles/hr. Each of its four jet engines has an inlet area of 10 ft² and an exit area of 3 ft². The fuel to air ratio is 1 to 40. The exit velocity of the combustion products is 6000 ft/s relative to the plane at a local gage pressure of 4 psi. The plane is at 40,000 ft where the air density is 5.94x10⁴ slugs/ft³. Mass flow rates of the fluids in and out of the engines are 5.23 slugs/s and 5.36 slugs/s respectively.
What is the drag force of the airplane?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
An airplane is moving at a constant speed of 600 miles/hr. Each of its four jet engines has an inlet...
Questions
History, 02.12.2019 23:31
Mathematics, 02.12.2019 23:31
Mathematics, 02.12.2019 23:31
Mathematics, 02.12.2019 23:31
Spanish, 02.12.2019 23:31
