Calculate the normal strain in the steel bar given below when 10.0 kips10.0 kips is applied. The bar is 2 inches in diameter and 20 inches long before the load is applied. E=29000 ksi. E=29000 ksi. (Note: a micron is 10−6 in./in.10−6 in./in.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

In modern manufacturing, which types of metal chips would be undesirable and why ? ?