subject
Engineering, 02.03.2020 18:30 knikni06

Water, initially a saturated liquid at 140 oC, is contained in a piston-cylinder assembly. Thewater is heated to the corresponding saturated vapor state in an internally reversible process atconstant temperature and pressure. For a dead state at To= 20 °C and po= 1 bar, determine in kJ/kg:

(a) The change in exergy
(b) The exergy transfer accompanying heat
(c) The exergy transfer accompanying work
(d) The exergy destruction

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
You know the right answer?
Water, initially a saturated liquid at 140 oC, is contained in a piston-cylinder assembly. Thewater...
Questions
question
Mathematics, 28.08.2019 09:50
question
English, 28.08.2019 09:50
question
Computers and Technology, 28.08.2019 09:50
Questions on the website: 13722363