Describe three parts of a fluid power system and the roles played by each to make the device work.

Plz hurry...this is due in like 5 mins

Three parts of a fluid power system and the roles played by each to make the device work.

Explanation:

1.Fluid power is subdivided into hydraulics using a liquid such as mineral oil or water, and pneumatics using a gas such as air or other gases.

2.Fluid power systems perform work by a pressurized fluid bearing directly on a piston in a cylinder or in a fluid motor.

Hydraulics Pumps

Dynamic (non positive displacement) Pumps

This type is generally used for low-pressure, high volume flow applications. Since they are not capable of withstanding high pressures, there is little use in the fluid power field. Their maximum pressure is limited to 250-300 psi. This type of pump is primarily used for transporting fluids from one location to another. Centrifugal and axial flow propeller pumps are the two most common types of dynamic pumps.

Positive Displacement Pumps

This type is universally used for fluid power systems. With this pump, a fixed amount of fluid is ejected into the hydraulic system per revolution of pump shaft rotation. These pumps are capable of overcoming the pressure resulting from the mechanical loads on the system as well as the resistance to flow due to friction. These two features are highly desirable in fluid power pumps. These pumps also have the following advantages over non positive displacement pumps: High-pressure capability (up to 12,000 psi)

Small compact size

high volumetric efficiency

small changes in efficiency throughout the design pressure range

correct me if i’m wrong but i believe it’s false

Answer: yesexplanation: