A heat pump is used to warm a building in the winter. This system implements an ideal vapor-compression cycle with R-134a as the working fluid. The cycle operates between 200 kPa and 800 kPa, with a mass flow rate of 0.02 kg/s. Determine: (a) the heating load that can be met kW (b) the power input required for this system kW (c) the coefficient of performance (d) the warmest outside temperature at which this particular cycle is unable to operate ∘C

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines