Engineering, 27.02.2020 04:17 sarath30

A gas turbine power plant receives a shipment of hydrocarbon fuel whose composition is uncertain but may be represented by the expression C x H y CxHy. The fuel is burned with excess air. An analysis of the product gas gives the following results on a moisture-free basis: 10.5%(v/v) CO2, 5.3% O2, and 84.2% N2. Determine the molar ratio of hydrogen to carbon in the fuel ( r ) (r), where r = y / x r=y/x, and the percentage excess air used in the combustion. What is the air-to-fuel ratio ( m 3 m3 air/kg of fuel) if the air is fed to the power plant at 30°C and 98 kPa? The specific gravity of the fuel (a petroleum product) is 0.85. Estimate the ratio standard cubic feet of gas fed to the turbine per barrel of fuel. Exploratory Exercise—Research and Discover What are the issues associated with using oil as a fuel as opposed to natural gas? Consider two factors: (i) the complete composition of typical fuel oils and their resulting emissions, and (ii) the availability and global distribution of the two fuel sources.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

You know the right answer?

A gas turbine power plant receives a shipment of hydrocarbon fuel whose composition is uncertain but...

Questions