Engineering, 26.02.2020 03:29 Jofish5815

A conical funnel of half-angle θ = 30 drains through a small hole of diameter d = 6:25 mm at the vertex. The speed of the liquid leaving the funnel is V= √ 2gy where y is the height of the liquid free surface above the hole. The funnel initially is filled to height y0 = 300 mm. Obtain an expression for the time, t, for the funnel to completely drain, and evaluate. Find the time to drain from 300 mm to 150 mm (a change in depth of 150 mm), and from 150 mm to completely empty (also a change in depth of 150 mm). Can you explain the discrepancy in these times?

Answers: 1

Show answers

Answers

Answer from: gianna61

3175.424*y^3 + 0.45153*y + 55.552*y^2 = t + 12.0347055

t = 12.03

t = 81.473

velocity of the fluid decreases with level of fluid. Hence, in later stages the time taken is greater than in earlier stages

Explanation:

Given:

- The half angle θ = 30°

- The diameter of the small hole d = 6.25 mm

- The flow rate out of the funnel Q = A*√ 2gy

- The volume of frustum of cone is given by:

$V = \frac{\pi }{12}*y*(D^2 + d^2 + d*D})$

Where,

D: Is the larger diameter of the frustum

d: Is the smaller diameter of the frustum

y: The height of the liquid free surface from small diameter d base.

Find:

- Obtain an expression for the time, t, for the funnel to completely drain, and evaluate.

- Find the time to drain from 300 mm to 150 mm (a change in depth of 150 mm) and from 150 mm to completely empty (also a change in depth of 150 mm)

- Can you explain the discrepancy in these times?

Solution:

- We will use rate of change analysis by considering the rate of change of volume, and then apply the chain rule.

- The Volume of the frustum is a function of d , D , y. V = f ( d , D , y ). In our case the diameter of base d remains constant. Then we are left with:

V = f ( D , y )

- Determine a relationship between y and d. We will use half angle θ to determine the relationship between D and y by applying trigonometric ratios:

tan ( θ ) = D / 2*y

D = 2*y*tan ( θ )

- We developed a relationship between D and y in terms of half angle which remains constant. So the Volume is now only a function of one variable y:

V = f ( y )

- The volume of frustum of the cone can be written as:

$V = \frac{\pi }{12}*y*(D^2 + d^2 + d*D})$

Substituting the relationship for D in terms of y we have:

$V = \frac{\pi }{12}*y*(4*y^2*tan(Q) ^2 + d^2 + 2*d*y*tan(Q)})$

- Now by rate of change of Volume analysis we have:

dV / dt = [dV / dy] * [dy / dt]

- Computing dV / dy, where V = f(y) only:

$V = \frac{\pi }{12}*(4*y^3*tan(Q) ^2 + y*d^2 + 2*d*y^2*tan(Q)})\\\\\frac{dV}{dy} = \frac{\pi }{12}*(12*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)})\\\\$

- Where, dV/dt = Volume flow rate:

$\frac{dV}{dt} = - Q\\\frac{dV}{dt} = - A*V\\\frac{dV}{dt} = - \frac{\pi*d^2 }{4} *\sqrt{2*g*y}$

- Then from Chain rule we have:

[dy / dt] = [dV / dt] / [dV / dy]

$\frac{dy}{dt} = \frac{- \frac{\pi*d^2 }{4} *\sqrt{2*g*y}}{\frac{\pi }{12}*(12*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)}\\\\} \\\frac{dy}{dt} = \frac{-d^2 *\sqrt{2*g*y}}{(4*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)}\\\\}$

- Separate variables:

$\frac {(4*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)} {\sqrt{2*g*y}} .dy = {-d^2} .dt\\\\\frac { 1 } { \sqrt{2*g} }*(4*y^1^.^5*tan(Q) ^2 + y^-^0^.^5d^2 + 4*d*y^0^.^5*tan(Q))= {-d^2} .dt\\$

- Integrate both sides:

$\frac { 1 } { \sqrt{2*g} }*(4*y^1^.^5*tan(Q) ^2 + y^-^0^.^5d^2 + 4*d*y^0^.^5*tan(Q))= {-d^2} .dt\\\\\frac { 1 } { \sqrt{2*g} }*(\frac{8}{5}*y^2^.^5*tan(Q) ^2 + 2*d^2*y^0^.^5 + \frac{8}{3}*d*y^1^.^5*tan(Q)) = -d^2*t + C\\\\\frac { 1 } { \sqrt{2*y*g} }*(\frac{8}{5}*y^3*tan(Q) ^2 + 2*d^2*y + \frac{8}{3}*d*y^2*tan(Q)) = -d^2*t + C\\\\0.1204*y^3 + 0.000017638*y + 0.00217*y^2 = -0.0000390625*t + C\\\\3175.424*y^3 + 0.45153*y + 55.552*y^2 = -t + C$

- Evaluate @ t = 0 , y = 0.3 m

$3175.424*(0.15)^3 + 0.45153*(0.15) + 55.552*(0.15)^2 = 0 + C\\\\C = 12.0347055\\\\3175.424*y^3 + 0.45153*y + 55.552*y^2 = t + 12.0347055$

- Time taken from y = 300 to 150 mm:

$3175.424*0.15^3 + 0.45153*0.15 + 55.552*0.15^2 = -t + 90.871587\\\\t = 0 - -12.0347055\\\\t = 12.0347055 s\\$

- Time taken from y = 150 to 0 mm:

t = t_(0-300) - ( t_(0-150) = 90.871587 - 12.0347055 = 81.4721 s

- The discrepancy is time can be explained by the velocity of fluid coming out of bottom is function of y. The velocity of the fluid decreases as the level of fluid decreases hence the time taken from y =150 mm to 0 mm is larger than y = 300 mm to y = 150 mm.

Answer from: Quest

Do you need to draw this out?

Answer from: Quest

answer:

jiggy jiggy jab my titty

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj

Answers: 2

Answer

You know the right answer?

A conical funnel of half-angle θ = 30 drains through a small hole of diameter d = 6:25 mm at the ver...

Questions