Engineering, 25.02.2020 21:22 seider8952
A full journal bearing has a journal diameter of 25 mm, with a unilateral tolerance of 20.03 mm. The bushing bore has a diameter of 25.03 mm and a unilateral tolerance of 0.04 mm. The lyd ratio is 1y2. The load is 1.2 kN and the journal runs at 1100 rev/min. If the average viscosity is 55 mPa ? s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 2
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
A full journal bearing has a journal diameter of 25 mm, with a unilateral tolerance of 20.03 mm. The...
Chemistry, 06.11.2020 02:30
Mathematics, 06.11.2020 02:30
Mathematics, 06.11.2020 02:30
Medicine, 06.11.2020 02:30
Chemistry, 06.11.2020 02:30
Mathematics, 06.11.2020 02:30
Geography, 06.11.2020 02:30