Calculate the displacement volume, delivery pulsation coefficient, input power leakage flow rate, resistance to internal leakage, and the driving torque of a gear pump with the following parameters:

Pump speed = 1450 rpm, number of teeth = 12
Gear module = 3.5 mm, gear width = 20 mm
Pressure angle = 20, inlet pressure = 0.2 MPa
Outlet pressure = 15 MPa, mechanical efficiency = 0.85
Volume efficiency = 0.9

If the pressure is increased to 220 bar, calculate the volumetric efficiency.

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.