subject
Engineering, 25.02.2020 01:53 avaleasim

What is the advantage of using a double loop detector instead of a single loop detector? What can single loop detector measure and what can double loop detector measure?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
question
Engineering, 06.07.2019 03:30
The load on a bolt consists of an axial pull of 10 kn together with a transverse shear force of 5 kn. the bolt material has a yield strength of syt syc 100 mpa. find the diameter of the bolt at factor of safety n-0.5, n 1 and n-2 using maximum shear stress theory
Answers: 3
question
Engineering, 06.07.2019 06:10
Abritle material made of astm grade 30 cast iron has ultimate strength in tension of 31 kpsi and altimate strength in compression of 109 kpsi and undergoes the following plane of stress te 20 lepst and ry10 kpsi (cw). a) using the 3d mohr's circle, find all three principal normal stresses. b) using the brittle-coulomb-mohr theory and modified-mohr theory. ind the factors of safety for the given plane of stress state.
Answers: 1
You know the right answer?
What is the advantage of using a double loop detector instead of a single loop detector? What can si...
Questions
question
Mathematics, 31.03.2021 18:50
question
Mathematics, 31.03.2021 18:50
question
Mathematics, 31.03.2021 18:50
question
History, 31.03.2021 18:50
Questions on the website: 13722363