Engineering, 22.02.2020 03:33 anthonybowie99

A gas turbine plant operates on the regenerative Brayton cycle with two stages of reheating and two stages of intercooling between the pressure limits of 100 and 1200 kPa. The working fluid is air. The air enters the first and the second stages of the comprrssor at 300 K and 350 K, respectively, and the first and the second stage stages of the turbine at 1400 K and 1300 K, respectively. Assuming both the compressor and the turbine have an isentropic efficiency of 80% and the regenerator has an effectiveness of 75% and using variable specific heats, determine:

(a) The back work ratio and the net work output.

(b) The thermal efficiency.

(c) The second-lawnefficiency of the cycle.

(d) The exergies at the exits of the combustion chamber (stage 6) and the regenerator (stage 10).

Answers: 2

Show answers

Answers

Answer from: emma8292

Explanation:

Given

T₁ = 300 K,

T₃ = 350 K

P₁, P₃ = 100 kPa

P₂, P₄ = 1200 kPa

T₆ = 1400 K

T₈ = 1300 K

$\eta_{Compressor}$ , $\eta_{Turbine}$ = 80 %

Effectiveness of regenerator = 75 %

Step by step solution is given as

Point 1

T₁= 300 K

Point 2

$\eta_{c} = \frac{h_{2s}- h_{1} }{h_{2} -h_{1} } = \frac{c_{p}( T_{2s}- T_{1} }{c_{p}(T_{2}- T_{1})}$ from which T₂ = T₁ + $\frac{( T_{2s}- T_{1} )}{\eta_{c} }$

From the above therefore to find T₂, we look for the value of $T_{2s}$ as follows

$\frac{T_{2s} }{T_{1} } = (\frac{P_{2} }{P_{1} })^{\frac{k-1}{k} }$ from which $T_{2s} = 300 K(\frac{1200 kPa}{100kPa} )^{\frac{0.4}{1.4} } =$ 610.18 K

Therefore T₂ = T₁ + $\frac{( T_{2s}- T_{1} )}{\eta_{c} }$ = 300 K + $\frac{610.18-300}{0.8}$ = 687.726 K

Point 3

T₃ = 350 K, inlet condition of 2nd compressor

Point 4

The value of T₄ is calculated as follows

$\eta_{c} = \frac{h_{4s}- h_{3} }{h_{4} -h_{3} } = \frac{c_{p}( T_{4s}- T_{3} }{c_{p}(T_{4}- T_{3})}$ from which T₄ = T₃ + $\frac{( T_{4s}- T_{3} )}{\eta_{c} }$

also since

$\frac{T_{4s} }{T_{3} } = (\frac{P_{4} }{P_{3} })^{\frac{k-1}{k} }$ we have $T_{4s} = 350 K(\frac{1200 kPa}{100kPa} )^{\frac{0.4}{1.4} } =$ 711.87 K

T4 = 802.34 K

Point 5

$\epsilon_{regen} =\frac{q_{regen,act} }{q_{regen,max}} = \frac{h_{5}- h_{4} }{h_{9} -h_{4} } = \frac{c_{p}( T_{5}- T_{4} }{c_{p}(T_{9}- T_{4})}$ from which T₅ =T₄ + $\epsilon_{regen}$ ×(T₉ - T₄)

Therefore we look for T₉ first before determining T₅

Point 6

T₆ is given as = 1400 K

Point 7

Here we also have

$\eta_{t} = \frac{h_{6}- h_{7} }{h_{6} -h_{7s} } = \frac{c_{p}( T_{6}- T_{7} }{c_{p}(T_{6}- T_{7s})}$ from which T₇ = T₆ - $\eta_{t}{( T_{6}- T_{7s} )}$

also $\frac{T_{7s} }{T_{6} } = (\frac{P_{7} }{P_{6} })^{\frac{k-1}{k} }$ which gives $T_{7s} = 1400 K(\frac{P_{7} }{P_{6} } )^{\frac{0.4}{1.4} }$ here we assume efficient cycle with pressure ratio = √12 thus we have

$T_{7s} = 1400 K(\frac{1}{12 } } )^{\frac{0.4}{1.4} }$ = 688.32 K

and T₇ = T₆ - $\eta_{t}{( T_{6}- T_{7s} )}$ = 1400 - 0.8(1400-688.32) = 830.656 K

Point 8

T₈ = 1400 K

Point 9

Here we have

$\eta_{t} = \frac{h_{8}- h_{9} }{h_{8} -h_{9s} } = \frac{c_{p}( T_{8}- T_{9} }{c_{p}(T_{8}- T_{9s})}$ from which T₉ = T₈ - $\eta_{t}{( T_{8}- T_{9s} )}$

and $\frac{T_{9s} }{T_{8} } = (\frac{P_{9} }{P_{8} })^{\frac{k-1}{k} }$ → $T_{9s} = 1400 K(\frac{1}{12 } } )^{\frac{0.4}{1.4}}$ = 688.32 K

Therefore T₉ = 830.656 K

Therefore for point 5 we have T₅ =T₄ + $\epsilon_{regen}$ ×(T₉ - T₄) = 711.87 K + 0.75×(830.656 K-711.87 K) = 914.21 K

T₅ = 800.9595 K

(a) Back work ratio is given as T₁/T₉ = 300K/981.66 K = 0.3056

(b) Thermal efficiency under cold air standard is given as

$\eta_{th,regen}$ = $1-(\frac{T_{1} }{T_{6} })(r_{p} )^{\frac{k-1}{k} }$ = $1-\frac{300}{1300}\frac{1200}{100}^{\frac{0.4}{1.4} }$ =0.5606 or 53.06 %

$\eta _{turbine} = \frac{W_{real} }{W_{rev} }$ = Wrev = 1 - TL/TH = 1 -300/1400 = 0.786

Therefore we have

$\eta_{II} =$ 0.53/0.786 =0.675

(d) The exergy is given by $\epsilon = \frac{E_{out}-E_{in} }{W }$ for the compressor

and for the turbine we have

$\epsilon =\frac{W_{net} +W_{c} }{E_{in} - E_{out} }$

Answer from: Quest

answer:

i lost in getting someone back.

i learned that people are really two-faced and no matter how angelic someone appears they always have a devil side and that you cant trust anyone anymore no matter how dear they are to you.

if your wondering who it waz it waz mah still miss her tho

~batmans wife dun dun

Answer from: Quest

answer:

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?

Answers: 3

Answer

Engineering, 06.07.2019 03:10

List and describe the attached tools in boxford cnc milling machine? and how many tools were used in your projects explain them?

Answers: 3

Answer

You know the right answer?

A gas turbine plant operates on the regenerative Brayton cycle with two stages of reheating and two...

Questions