subject
Engineering, 21.02.2020 17:59 fernandaretanaoxwln0

Sections of this interstate have speed limits of 65mph. A construction site is located on this interstate near Boise, ID. In the construction site, the speed limit is reduced to 20 mph. A warning sign reading "WORK ZONE: 20 MPH SPEED ZONE" is required to be put before the start of the construction site so as to allow drivers to decelerate before entering the work zone. The sign is located 20 ft. to the side of the road, the deceleration rate of the vehicle is 11 ft./sec2 (recommended maximum deceleration rate by AASHTO) and the driver is assumed to have 20/40 vision. You may assume a perception time of 1 sec, an interpretation rate of 3 words/sec, and a decision time of 0.5 sec. Assuming the road is level answer the following questions.

a. What should be the minimum distance away from the warning sign from where the driver is able to read the warning? (Assuming 10 degree cone of vision and the vehicle is moving on the side of the road i. e. lateral distance between car and warning sign is 20 ft.)

b. Determine the total time taken by driver before he applies brakes. Also, determine the distance travelled during perception, interpretation, and reaction.

c. Assuming that the driver reacts only once he is out of 10 degree cone of vision, calculate the minimum distance away from the start of the construction site where a warning sign must be located to allow drivers to decelerate before entering the work zone.

d. Determine the minimum size of the text on the sign.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
Sections of this interstate have speed limits of 65mph. A construction site is located on this inter...
Questions
question
Physics, 14.09.2019 10:10
Questions on the website: 13722360