subject
Engineering, 21.02.2020 04:31 dozsyerra

A common problem in over-the-air television signal transmission is multipath distortion of the received signal due to the transmitted signal bouncing off structures. Typically a strong main signal arrives at some time and a weaker ghost signal arrives later. So if the transmitted signal is x,() the recieved signal is where >> Kg and 1.x, . 1 What is the transfer function of this communication channel? 2. What would be the transfer function of an equalization system that would compensate for the effects of multipath?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
A common problem in over-the-air television signal transmission is multipath distortion of the recei...
Questions
question
Mathematics, 17.11.2019 00:31
question
Mathematics, 17.11.2019 00:31
Questions on the website: 13722363