Engineering, 21.02.2020 02:58 mariap3504
An angle is observed repeatedly using the same equipment and procedures producing the data below:32 ∘ 37' 00", 32 ∘ 37' 10", 32 ∘ 37' 10", and 32 ∘ 36' 55"Part A Calculate the angle is most probable value. Calculate the angle's most probable value
Calculate the standard deviation.
Calculate the standard deviation of the mean
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
An angle is observed repeatedly using the same equipment and procedures producing the data below:32...
Mathematics, 01.10.2019 13:30
History, 01.10.2019 13:30
Mathematics, 01.10.2019 13:30
English, 01.10.2019 13:30
Mathematics, 01.10.2019 13:30
Mathematics, 01.10.2019 13:30
English, 01.10.2019 13:30
Mathematics, 01.10.2019 13:30
Geography, 01.10.2019 13:30
Social Studies, 01.10.2019 13:30
English, 01.10.2019 13:30
Mathematics, 01.10.2019 13:30
Computers and Technology, 01.10.2019 13:30