Engineering, 20.02.2020 06:23 keelyrosewillia

An inductor of =6.95 H with negligible resistance is placed in series with a ℰ=12.5 V battery, a =3.00 Ω resistor, and a switch. The switch is closed at time =0 seconds. A square loop circuit containing a battery with E M F script E, an open switch S, and inductor of inductance L, and a resistor of resistance R, all connected in series. Calculate the initial current at =0 seconds. (=0 s)= 0 A Calculate the current as time approaches infinity. max= _ A Calculate the current at a time of 1.85 s. (=1.85 s)= _A Determine how long it takes for the current to reach half of its maximum. = ___s

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

You know the right answer?

An inductor of =6.95 H with negligible resistance is placed in series with a ℰ=12.5 V battery, a =3....

Questions