Engineering, 19.02.2020 00:53 lindsaypre0644

F(a, b, c, d, e) = (c + be′)(a + d′) G(a, b, c, d, e) = c + a′b′d + be′
a. Implement the functions using only two-input NAND gates and inverters in a multilevel circuit. Share any sub-expressions that you can when implementing the circuit.
b. Find the minimized two-level SOP expressions for F and G.
c. Implement the minimized SOP expressions using only two-input NAND gates and inverters. Share any sub-expressions that you can when implementing the circuit.
d. Compare your circuits (a) and (c) in terms of gate counts for NANDs and inverters. Briefly explain which circuit you would rather build.
For this problem, you may assume the both complemented and uncomplemented literal forms of the input variables are available. You need not show those inverters or include them in the gate count.
F and G represent separate functions that you want to implement simultaneously. You should still end up with two circuits, each of which has its own output.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

F(a, b, c, d, e) = (c + be′)(a + d′) G(a, b, c, d, e) = c + a′b′d + be′
a. Implement the funct...

Questions