Engineering, 19.02.2020 00:47 Arealbot

For a bolted assembly with 8 bolts, the stiffness of each bolt is kb = 1.0 MN/mm and the stiffness of the members is km = 2.6 MN/mm per bolt. The bolts are preloaded to 75 percent of proof strength. Assume the external load is equally distributed to all the bolts. The bolts are M6 x1 class 5.8 with rolled threads. A fluctuating external load is applied to the entire joint with Pmax = 60kN and Pmin = 20kN. Determine the following:. A) Determine the yielding factor of safety. B) Determine the overload factor of safety. C) Determine the factor of safety based on joint separation. D) Determine the factor of safety using the Goodman criterion.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

You know the right answer?

For a bolted assembly with 8 bolts, the stiffness of each bolt is kb = 1.0 MN/mm and the stiffness o...

Questions