subject
Engineering, 19.02.2020 00:11 ZeroFrost7899

Design a flat plate collector (collector area) facing south with a single glass cover for a single family residential house located in Atlanta, Georgia(Latitude: 33.65oN)based on an monthly average global daily solar radiation incident on the collector in themonth of August with a tilt angle equal to the latitude of that location. The mass flow rate of water entering the collector is 0.25 kg/s at 20oC on average. The targeted exit temperature of the water is 75oC. Assume the maximum collector efficiency of 60%, τcovαabs = 0.9

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
You know the right answer?
Design a flat plate collector (collector area) facing south with a single glass cover for a single f...
Questions
question
Mathematics, 23.07.2020 19:01
Questions on the website: 13722363