Engineering, 18.02.2020 22:40 Dajabrooks492
Link AB, of width b = 2 in. and thickness t = 14 in., is used to support the end of a horizontal beam. The average normal stress in the link is -22 ksi and the average shearing stress in each of the two pins is 12 ksi.1) Determine diameter of pins.2) Average bearing stress in the link.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Link AB, of width b = 2 in. and thickness t = 14 in., is used to support the end of a horizontal bea...
Questions
Mathematics, 17.02.2021 20:10
Mathematics, 17.02.2021 20:10
History, 17.02.2021 20:10
Mathematics, 17.02.2021 20:10
Mathematics, 17.02.2021 20:10
Mathematics, 17.02.2021 20:10
Mathematics, 17.02.2021 20:10
