Engineering, 18.02.2020 05:01 907to760
A device is being marketed to your company. The de- vice takes in hot, high-pressure water and generates work by converting it to two outlet streams: steam and low-pressure water. You are asked to evaluate the ng device to see if your firm should buy it. All you are told is that 10 kW of work is obtained under the following operating conditions: Outlet Outlet qua ad PTT Inlet Stream 1st Stream 2 0.5 ed Mass flow rate (kg/s) 1.0 T (°C) |300 100 300 P (MPa) 5.0 able Steam Liquid Quality unknown Sat. liquid a. What is the quality of the steam in outlet stream 1? b. Is this device thermodynamically feasible? of
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
A device is being marketed to your company. The de- vice takes in hot, high-pressure water and gener...
Questions
Social Studies, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
History, 08.08.2019 18:20
English, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
History, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
Social Studies, 08.08.2019 18:20
