Engineering, 18.02.2020 01:53 k3ydag0at

In orthogonal machining, the tool has a rake angle α = 10°, chip thickness before cut is 0.5 mm, chip thickness after cut is 1.15 mm and depth of cut is 3 mm. The cutting and thrust forces are measured at Fc = 1550 N and Ft = 1270 N, while the cutting speed is 60 m/min. Determine:

a. machining shear strain.
b. shear stress
c. cutting power
d. coefficient of friction between tool and chip (µ)
e. shear angle
f. shear force, Fs
g. chip velocity
h. shear velocity
i. MRR
j. specific energy
k. friction power
l. shear power
m. Gross power to operate the machine tool P, if the mechanical efficiency is 0.87.
n. draw the merchant’s circle by using a reasonable scale
p. resultant force, R
q. friction angle, ß

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

In orthogonal machining, the tool has a rake angle α = 10°, chip thickness before cut is 0.5 mm, chi...

Questions