Engineering, 17.02.2020 23:24 elizzabel1944
The storativity of a confined aquifer is found to be 1.8 x 10-4 as a result of a pumping test. The thickness of the aquifer is 50m and the porosity of the aquifer is 0.25. Determine the fractions of the expansibility of the water and the compressibility of the aquifer skeleton in making up the storativity of the aquifer. Assuming water is at 15ºC. The compressibility of water is 4.673x10-10 m2/N.
Answers: 2
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
The storativity of a confined aquifer is found to be 1.8 x 10-4 as a result of a pumping test. The t...
Computers and Technology, 17.03.2020 03:21