subject
Engineering, 17.02.2020 18:17 Jorjalilli8786

Consider the internal structure of the pseudo-CPU augmented with a single-port register file (i. e., only one register value can be read at a time) containing 32 8-bit registers (R31-R0) and a carry bit (C-bit), which is set/reset after each arithmetic operation. Suppose the pseudo-CPU can be used to implement the AVR instruction ADIW ZH:ZL,32 (Add immediate to word). ADIW is a 16-bit instruction, where the upper byte represents the opcode and the lower byte represents an immediate value, i. e., "32" (do not worry about the fact that the actual format is slightly different). Give the sequence of microoperations required to Fetch and Execute the ADIW instruction.

Your solutions should result in exactly 5 cycles for the fetch cycle and 6 cycles for the execute cycle. Assume the memory is organized into addressable bytes (i. e., each memory word is a byte), MDR, IR, and AC registers are 8-bit wide, and PC and MAR registers are 16-bit wide. Also, assume Internal Data Bus is 16-bit wide and thus can handle 8-bit or 16-bit (as well as portion of 8-bit or 16-bit) transfers in one microoperation and only PC and AC have the capability to increment itself.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
You know the right answer?
Consider the internal structure of the pseudo-CPU augmented with a single-port register file (i. e.,...
Questions
question
Mathematics, 14.10.2019 18:00
Questions on the website: 13722363