Engineering, 14.02.2020 16:12 marandasullivan
Steam heated at constant pressure in a steam generator enters the first stage of a supercritical reheat cycle at 28 MPa, 520°C. Steam exiting the first-stage turbine at 6 MPa is reheated at constant pressure to 500°C. Each turbine stage has an isentropic efficiency of 84% while the pump has an isentropic efficiency of 82%. The saturated liquid exits the condenser that operates at a constant pressure of 70 kPa. Determine the quality of the steam exiting the second stage of the turbine and the thermal efficiency.
Answers: 1
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Steam heated at constant pressure in a steam generator enters the first stage of a supercritical reh...
Mathematics, 19.07.2021 19:40
English, 19.07.2021 19:40
English, 19.07.2021 19:40
Mathematics, 19.07.2021 19:40
English, 19.07.2021 19:40
Mathematics, 19.07.2021 19:50
Mathematics, 19.07.2021 19:50
English, 19.07.2021 19:50
Mathematics, 19.07.2021 19:50