Engineering, 11.02.2020 23:12 TrueKing184
In the ac bridge circuit of Fig. 9.37, suppose that balance is achieved when is a resistor, is a resistor in series with a inductor, is a resistor, and Determine the series components that make up:.
Answers: 3
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
In the ac bridge circuit of Fig. 9.37, suppose that balance is achieved when is a resistor, is a res...
Mathematics, 15.12.2021 02:10
Mathematics, 15.12.2021 02:10
Mathematics, 15.12.2021 02:10
Mathematics, 15.12.2021 02:10
Chemistry, 15.12.2021 02:10
Chemistry, 15.12.2021 02:10
History, 15.12.2021 02:10
Mathematics, 15.12.2021 02:10
Arts, 15.12.2021 02:10
Mathematics, 15.12.2021 02:10
Social Studies, 15.12.2021 02:10
Social Studies, 15.12.2021 02:10