Engineering, 11.02.2020 21:17 kkkhomewirk
The spring has a spring constant of 2000 N/m, and it is undeformed when the collar is at position 1. What is the magnitude of the spring force at the instant when the collar moves to position 2:
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
The spring has a spring constant of 2000 N/m, and it is undeformed when the collar is at position 1....
Questions
Mathematics, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Business, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Geography, 16.10.2019 18:50
Health, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Mathematics, 16.10.2019 18:50
Health, 16.10.2019 18:50
