Engineering, 11.02.2020 19:46 stheo
MOSFET is a common-source amplifier driving a load resistor. Assume the MOSFET operates in saturation and is characterized by parameters VTN and KN.
a. Derive an expression for the transfer characteristics of the amplifier: vOUT versus vIN.
b. Draw the small-signal equivalent circuit of the amplifier assuming the input bias voltage is VIN.
c. Determine the small-signal gain of the amplifier.
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30Ā°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
MOSFET is a common-source amplifier driving a load resistor. Assume the MOSFET operates in saturatio...
Biology, 08.04.2020 21:01
Biology, 08.04.2020 21:01
Mathematics, 08.04.2020 21:01
History, 08.04.2020 21:01
Mathematics, 08.04.2020 21:01
Physics, 08.04.2020 21:02
Biology, 08.04.2020 21:02