subject
Engineering, 11.02.2020 01:11 staffordkimberly

In order to prevent fogging, the 3 mm-thick rear window of an automobile has a transparent film electrical heater bonded to the inside of the glass. During a test, 200 W are dissipated in a 0.567m^2 are of the window when the inside and outside air temperatures are 22°C and 1°C, and the inside and outside heat transfer coefficients are 9 W/m^2*K and 22 W/m^2*K.
1. Determine the temperature of the inside surface of the window.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
In order to prevent fogging, the 3 mm-thick rear window of an automobile has a transparent film elec...
Questions
question
Biology, 12.07.2019 03:30
question
Mathematics, 12.07.2019 03:30
Questions on the website: 13722367