Match the descriptions to the respective stage of team
development
forming stage<...
Engineering, 08.02.2020 14:43 stef76
Match the descriptions to the respective stage of team
development
forming stage
storming stage
norming stage
performing stage
the team transitions into this stage after completion of its first successful project.
in this stage, the team members come together for the first time.
in this stage, the members have a better idea of what the team expects of them.
in this stage, comfort and trust between the members is high.
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Biology, 09.01.2020 04:31
Mathematics, 09.01.2020 04:31
History, 09.01.2020 04:31
Mathematics, 09.01.2020 04:31
Mathematics, 09.01.2020 04:31
English, 09.01.2020 04:31
History, 09.01.2020 04:31
Biology, 09.01.2020 04:31