Engineering, 29.01.2020 05:43 solidermorrison9209
What is the difference between cement and concrete? 2. list the conditions that must be met to make a satisfactory concrete mix. 3. list the precautions that should be taken to cure concrete properly. how do these change in very hot, very windy, and very cold weather?
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
What is the difference between cement and concrete? 2. list the conditions that must be met to make...
SAT, 22.07.2021 09:40
Engineering, 22.07.2021 09:40
English, 22.07.2021 09:40
Physics, 22.07.2021 09:40
Mathematics, 22.07.2021 09:40
History, 22.07.2021 09:40
History, 22.07.2021 09:40
German, 22.07.2021 09:40
Social Studies, 22.07.2021 09:40
Chemistry, 22.07.2021 09:40