subject
Engineering, 25.01.2020 03:31 shay9152

One difference between an actuator disk and a real rotor is that the aerodynamically active parts of real rotor blades do not extend all the way to the rotational axis -the so-called root cut-out. this is because of the need to attach the blades to the hub and also provide flap and lead-lag hinges, as well as a feathering (pitch) bearing. for a root cut-out of 25% of radius and a tip-loss factor b 0.97, estimate the s d additional effect ofthe root cut-out on the induced power factor of a hovering rotor.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
question
Engineering, 06.07.2019 03:20
Major ingredients of traditional ceramics (a) silica (b) clay (c) feldspar (d) all
Answers: 1
question
Engineering, 06.07.2019 04:20
Derive the 2-d finite difference equation for a uniform grid for a node: a) at a plane surface with a uniform heat flux b) at an internal corner with convection
Answers: 1
You know the right answer?
One difference between an actuator disk and a real rotor is that the aerodynamically active parts of...
Questions
Questions on the website: 13722367