Engineering, 22.01.2020 20:31 znation1324

An engineer in a large manufacturing facility observes that some unknown liquid has seeped into an open tank of lubricating oil. the mysterious liquid is not mixing with the oil and is resting at the bottom of the tank. he or she makes some measurements, and determines that the depth of the unknown liquid is 1.5m, and that the depth of the oil is 5m. the specific weight of the oil is known to be 8500n/m3, and a pressure gage connected to the bottom of the tank reads 65kpa making appropriate assumptions, determine the following: 2. (a) the specific gravity of the unknown liquid () (b) the density of the unknown liquid (kg/m3) (c) if liquid water were to seep into the tank and didn't mix with either liquid, where would it come to rest? at the bottom? at the top? or between the oil and the oil liquid?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

You know the right answer?

An engineer in a large manufacturing facility observes that some unknown liquid has seeped into an o...

Questions