Engineering, 17.01.2020 21:31 poptropic7623

Consider an naca 2412 airfoil (the meaning of the number designations for standard naca airfoil shapes is discussed in chapter 4).
the following is a tabulation of the lift, drag, and moment coefficients about the quarter chord for this airfoil, as a function of angle of attack.

a (degrees) -2.0 2.0 4.0 c 0.05 0.25 0.44 0.64 0.85 1.08 1.26 1.43 1.56 cd 0.006 0.006 0.006 0.007 0.0075 0.0092 0.0115 0.0150 0.0186 cm. c/4 -0.042 -0.040 -0.038 -0.036 -0.036 -0.036 -0.034 -0.030 -0.025 6.0 8.0 10.0 12.0 14.0

(a) plot on graph paper the variation of xcp/c as a function of a.

(b) as angle of attack increase from -2 to 14 degree, where will the center of pressure approach?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

Consider an naca 2412 airfoil (the meaning of the number designations for standard naca airfoil shap...

Questions