subject
Engineering, 17.01.2020 01:31 lori90

Avertical piston cylinder device contains a gas at an unknown pressure. if the outside pressure is 100kpa, determine a) the pressure of the gas if the piston has an area of 0.2m2. and a mass of 20 kg. assume g=9.81m/s2. b) what would the pressure be if the orientation of the device were changed and it were now upside down?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Avertical piston cylinder device contains a gas at an unknown pressure. if the outside pressure is 1...
Questions
question
Social Studies, 19.08.2019 03:30
question
Geography, 19.08.2019 03:30
Questions on the website: 13722367